Siemens 6AU1900-1AB32-0BA0 configurationmanual Click a diagram to show the Cam menu

Configuring

3.3Editing a Cam with CamTool

2.Click a diagram to show the Cam menu.

)L[HGSRLQW

6GLDJUDPGLVWDQFHGLDJUDP

6HJPHQWERXQGDU\6HJPHQWERXQGDU\

,QWHUSRODWLRQFXUYHWUDQVLWLRQ

9GLDJUDPYHORFLW\GLDJUDP

$GLDJUDPDFFHOHUDWLRQGLDJUDP

Figure 3-9 Cam segment replaced by SIMOTION CamTool with fixed point and transition (interpolation polynomial)

3.Click the menu Cam > Upload cam. The cam is uploaded from the SIMOTION device.

4.After the upload, you can change back to OFFLINE status. Click the menu Project > Disconnect from target system.

Notice

When you upload a cam from the SIMOTION device and have previously changed the displayed cam, a window appears. You can accept the changed cam into the project via the window. The cam is then uploaded from the SIMOTION device.

3-14	CamTool
	Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0