Siemens 6AU1900-1AB32-0BA0 Arc Sine Curve, Delete sine curve, Insert arc sine curve

Functions

4.6 Arc Sine Curve

4.5.4Delete sine curve

Requirements

The cam is opened with SIMOTION CamTool.

Delete sine curve

To delete a sine curve:

1.Select the sine curve that you want to delete.

2.Press the DEL key. The sine curve is deleted and the representation of the cam adjusted in all diagrams.

4.6Arc Sine Curve

4.6.1Insert arc sine curve

Requirements

The cam is opened with SIMOTION CamTool.

Notice

The arc sine curve is calculated as an interpolation point table. The number of interpolation points can be specified in the Fx Arc Sine Properties window. Double-click the arc sine curve to show the window.

Insert arc sine curve

To insert an arc sine curve:

1.Click in the S diagram (distance diagram) to activate the diagram.

2.Click Arc sine under menu Cam > Insert > Functions. The mouse pointer changes.

3.With the changed mouse pointer, click the position in the S diagram (distance diagram) at which you want to insert the arc sine curve. The arc sine curve is inserted with a default size.

CamTool	4-15
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0