Siemens 6AU1900-1AB32-0BA0 Simulation settings, Master tab, Functions Specify simulation settings

Functions

4.10 Specify simulation settings

4.10.2Simulation settings

Master tab

You specify here the simulation settings for the Master tab.

You can set the following parameters:

Table 4-7		Parameters in the Master tab (Simulation Settings window)
		Field/button		Explanation/instructions
Setting
	Accept from axis		•	(Axis)
				When you create the cam for an axis that already exists
				in the project, you can select the axis here. The
				configured values are taken over and displayed. You
				can change the master velocity for calculations.
			•	(External encoder)
				When you create the cam for an external encoder that
				already exists in the project, you can select the external
				encoder here. The configured values are taken over and
				displayed.
			•	None
				If you select None, you can specify all parameters.
			•	Time axis
				If you select Time axis, you can specify the unit of
				measure under Properties.
Properties
(Setting: None)
(Setting: Time axis)
	Linear axis		If you select this option, you simulate the master axis as a
	(Setting: None)		linear axis.
	Rotary axis		If you select this option, you simulate the master axis as a
	(Setting: None)		rotary axis.
	Modulo rotary axis		If you select this option, you simulate the master axis as a
	(Setting: None)		modulo rotary axis.
	Type		Here you select the axis type.
	(Setting: None)
	Unit of measure		Here you specify the unit of measure for the axis. Select a
	(Setting: None)		unit of measure or enter the unit of measure. The
	(Setting: Time axis)		representation of the unit of measure is refreshed in the
			diagrams when you click Accept or OK.
			Note:
			The unit of measure is only used for the display. If the unit
			of measure is changed, the represented values are not
			converted.

4-36	CamTool
	Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0