Section
20 
Audio Adjustments
Storing the adjusted audio settings in memory
You can store the adjusted audio settings in this unit for later recall.
1Touch MEMORY.
2Touch any of CUSTOM1, CUSTOM2 or CUSTOM3 to store the adjusted setting.
3Touch YES to store the current setting into the selected sound setting.
# To cancel the storage process, touch
CANCEL.
Editing the name of sound settings
The name displayed for sound settings
(SETTING1, SETTING2 and SETTING3) can be changed.
!Each name can be up to 10 characters long.
1Touch any of SETTING1, SETTING2 or SETTING3 on the sound setting menu.
2Touch NAME EDIT.
3Touch the letter you wish to input.
Key | What it does | |
|
| |
| Moves the cursor to the previous charac- | |
| ter position. | |
|
| |
| Moves the cursor to the next character po- | |
| sition. | |
|
| |
| Inputs the space. | |
|
| |
ABC/123 | Switches keypad between alphabet and | |
numeric. | ||
| ||
|
| |
| Deletes letter by letter from the end of the | |
| text. | |
|
|
4Touch MEMORY to store the entered name in memory.
106 En
Auto TA and EQ (auto-time alignment and auto- equalizing)
You can use this function only when STANDARD has been selected. (Refer to Switching the DSP setting mode on page 117.) The
The
WARNING
To prevent accidents, never carry out auto TA and EQ while driving. When this function measures the car interior acoustic characteristics to create an
CAUTION
!Carrying out auto TA and EQ under the follow- ing conditions may damage the speakers. Be sure to check the conditions thoroughly be- fore carrying out auto TA and EQ.
—When speakers are incorrectly connected. (e.g., When a rear speaker is connected to a subwoofer output.)
—When a speaker is connected to a power amp delivering output higher than the speaker’s maximum input power capabil- ity.
!If the microphone is placed in an unsuitable position the measurement tone may become loud and measurement may take a long time, resulting in a drain on battery power. Be sure to place the microphone in the specified loca- tion.
