Appendix

Additional Information

 

 

 

 

Additional

 

Message

Cause

Action (See)

 

 

 

 

 

 

 

FILE Skipped

The inserted disc contains WMA

Replace disc.

 

 

 

files that are protected by DRM

 

 

 

 

 

 

PROTECT

All the files on the inserted disc are

Replace disc.

Information

 

 

secured by DRM

 

 

 

 

 

 

 

 

 

 

Understanding auto TA and EQ error messages

When correct measurement of car interior acoustic characteristics is not possible using the auto TA and EQ, an error message may appear on the display. If an error message appears, refer to the table below to see what the problem is and the suggested method of correcting the problem. After checking, try again.

Message

Cause

Action

 

 

 

Error. Please check MIC.

Microphone is not connected.

Plug the supplied microphone securely into

 

 

the jack.

 

 

 

Error. Please check front SP.,

The microphone cannot pick up the

! Confirm that the speakers are connected

Error. Please check FL SP.,

measuring tone of a speaker.

correctly.

Error. Please check FR SP.,

 

! Correct the input level setting of the power

Error. Please check center SP.,

 

amp connected to the speakers.

Error. Please check rear SP.,

 

! Set the microphone correctly.

Error. Please check RL SP.,

 

 

Error. Please check RR SP.,

 

 

Error. Please check rear center

 

 

SP., Error. Please check sub-

 

 

woofer.

 

 

 

 

 

Error. Please check noise.

The surrounding noise level is too

! Stop your car in a place that is as quiet as

 

high.

possible, and switch off the engine, air condi-

 

 

tioner or heater.

 

 

! Set the microphone correctly.

 

 

 

En 127

Page 127
Image 127
Pioneer AVH-P7800DVD operation manual Understanding auto TA and EQ error messages, Message Cause Action