Section
18 
TV tuner
Watching the television
1 2 3 4 5
6
You can use this unit to control a TV tuner (e.g.
For details concerning operation, refer to the TV tuner’s operation manual. This section pro- vides information on TV operations with this unit which differs from that described in the TV tuner’s operation manual.
Important
Depending on the TV tuner connected to this unit, some functions may not be operable. For de- tails, refer to the TV tuner’s operation manual.
1Source icon
Shows which source has been selected.
2Source name
Shows the selected source name.
3Band indicator
Shows which band the TV tuner is tuned to.
4Preset number indicator
Shows which preset has been selected.
5Channel indicator
Shows which channel the TV tuner is tuned.
6Preset list display Shows the preset list.
1Touch the source icon and then touch TV to select the TV.
2Touch the screen to display the touch panel keys.
3Touch BAND to select a band.
Touch BAND repeatedly until the desired band is displayed, BAND 1 or BAND 2.
4To perform manual tuning, briefly touch c or d.
The channels move up or down step by step.
# You can also perform manual tuning by mov- ing the joystick left or right.
5To perform seek tuning, keep touching c or d for about one second and release. The tuner will scan the channels until a broad- cast strong enough for good reception is found.
# You can cancel seek tuning by briefly touching either c or d.
# If you keep touching c or d you can skip broadcasting channels. Seek tuning starts as soon as you release the keys.
# You can also perform seek tuning by holding the joystick left or right.
Note
If you do not use the touch panel keys within 30 seconds, they will be hidden automatically. 
Storing and recalling broadcast stations
If you touch any of the preset tuning keys
84
En
