Section
24 
Other Functions
Note
If touch panel adjustment cannot be performed properly, consult your local Pioneer dealer. 
Using the AUX source
This unit can control an auxiliary equipment such as VCR or portable device (sold sepa- rately). When connected, auxiliary equipment is automatically read in as AUX source and as- signed to AUX.
About AUX connection method
You have two methods to connect auxiliary equipment to this unit.
Stereo mini pin plug cable (AUX1)
When connecting auxiliary equipment using a stereo mini plug cable
%Insert the stereo mini plug into the mi- crophone/auxiliary input jack on this unit. For more details, refer to the installation man- ual.
IP-BUS-RCA interconnector (AUX2)
When connecting auxiliary equipment using an
%Use an
For more details, refer to the
# You can only make this type of connection if the auxiliary equipment has RCA outputs.
Selecting AUX as the source
%Touch the source icon and then touch AUX1/AUX2 to select AUX as the source.
# If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switch- ing the auxiliary setting on page 116.
Setting the AUX title
The title displayed for the AUX source can be changed.
!Each title can be up to 10 characters long.
1After you have selected AUX as the source, touch AV MENU and FUNCTION and then touch NAME EDIT.
2Touch the letter you wish to input.
For details concerning operation, refer to Edit- ing the name of sound settings on page 106. 
Using the PGM button
You can operate the preprogrammed functions for each source by using BOOKMARK on the remote control.
%Press BOOKMARK to turn pause on when selecting the following sources:
!DVD –
!
!
!iPod – iPod
!BT AUDIO – Bluetooth Audio
#To turn pause off, press BOOKMARK again.
%Press BOOKMARK and hold to turn BSM on when selecting FM or AM as the source.
Press BOOKMARK and hold until the BSM turns on.
122 En
