Pioneer AVH-P7800DVD operation manual Using compression and bass emphasis, Using ITS playlists

Section

11 Multi-CD Player

3When you find the desired track (or disc) touch SCAN again.

# After track or disc scanning is finished, nor- mal playback of the tracks will begin again.

Using compression and bass emphasis

You can use these functions only with a multi- CD player that supports them.

Using COMP (compression) and DBE (dy- namic bass emphasis) functions lets you ad- just the sound playback quality of the multi- CD player. Each of the functions has a two- step adjustment. The COMP function balances the output of louder and softer sounds at high- er volumes. DBE boosts bass levels to give playback a fuller sound. Listen to each of the effects as you select them and use the one that best enhances the playback of the track or CD that you are listening to.

%Touch COMPRESSION on the function menu to select your favorite setting.

Touch COMPRESSION repeatedly to switch be- tween the following settings: OFF—COMP1—COMP2—OFF—DBE1— DBE2

# If the multi-CD player does not support

COMP/DBE, NO COMP is displayed and COMPRESSION cannot be operated.

Using ITS playlists

ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi-CD player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selec- tions.

Creating a playlist with ITS programming

You can use ITS to enter and play back up to 99 tracks per disc from up to 100 discs (with the disc titles). (With multi-CD players sold be- fore the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.)

1Play a CD that you want to program.

2Touch ITS MEMORY on the function menu.

3Touch or to select the desired track.

4Touch MEMORY to store the currently playing track in the playlist.

MEMORY is displayed briefly and the cur- rently playing selection is added to your play- list. The display then shows track number again.

# After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest one.

Playback from your ITS playlist

ITS play lets you listen to the tracks that you have entered into your ITS playlist. When you turn on ITS play, tracks from your ITS playlist in the multi-CD player will begin to play.

1 Select the repeat range.

Refer to Repeating play on the previous page.

2Touch ITS PLAY on the function menu to turn ITS play on.

Playback begins of those tracks from your playlist within the previously selected MULTI-CD or DISC ranges.

# If no tracks in the current range are pro- grammed for ITS play, then ITS EMPTY is dis- played.

# To turn ITS play off, touch ITS PLAY again.

56 En