Pioneer AVH-P7800DVD operation manual TV tuner, Confirming current channel and other settings

TV tuner

% When you find a station that you want to store in memory, keep touching one of preset tuning keys P01—P12 until the beep sounds.

The next time you touch the same preset tun- ing key the station is recalled from memory.

#To switch between P01—P06 and P07—P12, touch PREV or NEXT.

#When P01—P06 and P07—P12 are not dis- played, you can display them by touching LIST.

Notes

!Up to 24 stations, 12 for each of two TV bands, can be stored in memory.

!You can also use a and b to recall stations as-

signed to preset tuning keys P01—P12 when P01—P12 are not displayed.

Confirming current channel and other settings

When watching a TV on the rear display, you can display the reception information such as the channel, band and preset channel list.

!Only the remote control can operate this function. To perform this function, switch the remote control operation mode to TV. (Refer to page 21.)

%Press DIRECT to display the reception information.

Each press of DIRECT displays reception infor- mations in the following order:

Current channel information (channel and band)—Preset channel list—Reception infor- mations disappear

# Reception informations are displayed for eight seconds.

Section

18

Storing the strongest broadcast stations sequentially

TV tuner

1

1Function display

Shows the function names.

1Touch AV MENU and then touch FUNCTION to display the function names. The function names are displayed and oper- able ones are highlighted.

2Touch BSSM on the function menu to turn BSSM on.

BSSM begins to flash. While BSSM is flashing the 12 strongest broadcast stations will be stored in order from the lowest channel up. When finished, BSSM stops flashing.

# To cancel the storage process, touch BSSM again.

3Touch ESC to return to the TV picture.

# To return to the previous display, touch BACK.

Note

Storing broadcast stations with BSSM may re- place broadcast stations you have saved using P01—P12.

En 85