Pioneer P7800DVD Using the auto-equalizer, Adjusting the speaker output levels finely

Audio Adjustments

3Touch or to adjust the speaker out- put level.

Each time you touch or it increases or de- creases the speaker output level. –24dB to +10dB is displayed as the level is increased or decreased.

# The test tone rotates to the next speaker after about two seconds from the last operation.

4Touch STOP to stop the test tone out- put.

Notes

!If needed, select speakers and adjust their ‘ab- solute’ output levels. (Refer to Adjusting the speaker output levels on the previous page.)

!You can store the adjusted setting in memory by using MEMORY. For details concerning op- eration, refer to Storing the adjusted audio set- tings in memory on the next page.

!The adjusted speaker output level cannot be stored by each listening position. This means, memorizing a speaker output level for custom setting overwrites the levels of all listening po- sitions.

Adjusting the speaker output levels finely

You can readjust the speaker output levels using a test tone while listening to music.

1Recall the speaker output level settings you want to adjust.

Refer to Recalling the speaker output level set- tings on the previous page.

2Touch ADJ. next to SPEAKER LEVEL.

3Touch or to adjust the speaker out- put level.

Each time you touch or it increases or de- creases the speaker output level. –24dB to

Section

20

+10dB is displayed as the level is increased or decreased.

#You cannot select speakers whose size is set at OFF.

Notes

!You can store the adjusted setting in memory by using MEMORY. For details concerning op- eration, refer to Storing the adjusted audio set- tings in memory on the next page.

!The adjusted speaker output level cannot be

stored by each listening position. This means,
memorizing a speaker output level for custom	Audio
setting overwrites the levels of all listening
positions.	Adjustments
Using the auto-equalizer
You can use this function only when
STANDARD has been selected. (Refer to
Switching the DSP setting mode on page 117.)
The auto-equalizer is the equalizer curve cre-
ated by auto TA and EQ (refer to Auto TA and
EQ (auto-time alignment and auto-equalizing)
on the next page).
You can turn the auto-equalizer on or off.

1Touch AUTO EQ on the sound setting menu.

# You cannot use this function if auto TA and EQ has not been carried out.

2Touch ON to turn the auto-equalizer

on.

# To turn auto-equalizer off, touch OFF.

En 105