Before You Start
What the marks on DVDs indicate
The marks below may be found on DVD disc labels and packages. They indicate the type of images and audio recorded on the disc, and the functions you can use.
Mark Meaning
!When strange or incorrect messages ap- pear on the display
Important
If you press RESET, all memorized settings are erased. For this reason, we recommend that you record the settings in the sheet on page 135 after you have completed audio adjustments.
Section
02
Before You Start
2
Indicates the number of audio sys- tems.
1 Turn the ignition switch OFF. |
2Indicates the number of subtitle lan-
guages.
Indicates the number of viewing an-
3 | gles. | |
| ||
16 : 9 LB | Indicates the picture size (aspect ratio: | |
screen | ||
|
2 Press RESET with a pen tip or other |
pointed instrument. |
1
Indicates the number of the region
ALL where playback is possible.
When an operation is prohibited
When you are watching a DVD and attempt to perform an operation, it may not be performed because of the programming on the disc.
When this happens, the icon 
appears on the screen.
!The icon 
may not appear with certain discs. 
RESET button
Note
After completing connections or when you want to erase all memorized settings or return the unit to its initial (factory) settings, switch your engine ON or set the ignition switch to ACC ON before pressing RESET.
Resetting the microprocessor
Pressing RESET lets you reset the micropro- cessor to its initial settings without changing the bookmark information.
The microprocessor must be reset under the following conditions:
!Prior to using this unit for the first time after installation
!If the unit fails to operate properly
En 
15
