Section
23
Initial Settings
!Switching the DSP mode erases the cur- rent adjusting audio settings
(LAST MEMORY). If needed, memorize it into custom settings (CUSTOM1, CUSTOM2 or CUSTOM3).
1Touch DSP MODE on the initial menu.
2Touch either of the following touch panel keys to select the desired mode.
!STANDARD – Standard mode
!NETWORK – Network mode
3Touch CHANGE to change the mode.
# To cancel changing the mode, touch
CANCEL.
connection from your Bluetooth audio player.
!Only when Bluetooth adapter (e.g. CD- BTB100) is connected to this unit, you can operate this function.
1Touch PIN EDIT on the initial menu. PIN code input display appears.
2Touch
# To cancel the inputted numbers, touch C.
3After inputting PIN code (up to 16 di- gits), touch ENTER.
The PIN code you entered is stored in this unit. 
Setting the optical input
When connecting a DVD player, select
%Touch OPTICAL INPUT on the initial menu to select the optical input setting. Touch OPTICAL INPUT until the desired set- ting appears in the display.
!OFF – No DVD player is connected
!
Entering PIN code for Bluetooth wireless connection
To connect your cellular phone to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone to verify the connection. The default code is 0000, but you can change this in this function.
!With some Bluetooth audio players, you may be required to enter to this unit in ad- vance PIN code of your Bluetooth audio player, in order to set this unit ready for a
Setting the security indicator
The LED indicator (security indicator) will flash when front panel is detached from the head unit. You can turn this indicator on or off.
%Touch SECURITY INDICATOR on the in- itial menu to turn security indicator on.
# To turn security indicator off, touch SECURITY INDICATOR again. 
