Connecting External Equipment, DEMO Mode, COMPU Play | JVC MX-KB30

Manual background

Getting Started

Connecting External Equipment

Connect a signal cord (not supplied) between the System’s AUX-IN terminals and the output terminals of the external MD recorder, tape deck, etc.

You can then listen to the external source through the System.

Signal cord (not supplied)

MD recorder, tape deck, etc. (not supplied)

English

Pin-plug x 2

Pin-plug x 2

Connecting to the Wall Outlet

Plug the AC power cord into the wall outlet.

Now, your System is at your command!

DEMO Mode

When the System is connected to the wall outlet, a DEMO mode displaying some of the system’s features automatically starts.

To turn the DEMO display off, press any of the operation buttons. The DEMO display automatically stops. To turn the DEMO display on, press the DEMO button on the Unit for more than 2 seconds.

CANCEL

DEMO

(For 2 seconds)

•While the System is turned on, the DEMO display will automatically starts if no operation is made for 2 minutes. To cancel this auto DEMO display function, press the CANCEL button on the Unit during DEMO display.

COMPU Play

JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single touch.

With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external equipment with a single press of the play button for that function. One Touch Operation turns the power on for you, then starts the function you have specified. If the System is not ready (no CD or tape in place), the System still powers on so you can insert a CD or tape.

How One Touch Operation works in each case is explained in the section dealing with that function. The COMPU PLAY buttons are:

On the Unit

CD 6 button

FM/AM button

TAPE 3button

AUX button

CD1, CD2 and CD 3 buttons

CD Open/Close 0button

On the Remote Control

CD 6 button

FM/AM button

TAPE 3button

AUX button

CD1, CD2 and CD 3 buttons

6

Image 41

JVC MX-KB30 Connecting External Equipment, Connecting to the Wall Outlet, DEMO Mode, COMPU Play, English, On the Unit

Contents

COMPACT COMPONENT SYSTEM MX-KB30INSTRUCTIONS Consists of CA-MXKB30and SP-MXKB30 WARNING TO REDUCE THE RISK OF FIRE OR Note to CATV system installerELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI ANCE TO RAIN OR MOISTURE 16in Caution - POWER switch5/16in 15cm 1Installation of the System Features2Power cord Introduction Specifications Table of Contents How To Put Batteries In the Remote Control AccessoriesUsing the Remote Control Getting Started Using the Supplied Wire Antenna Connecting the FM AntennaUsing an FM 75-OhmAntenna Cable not Supplied FM wire antenna supplied Connecting the Speakers Connecting the AM AntennaGetting Started Rear Panel of the Unit Connecting to the Wall Outlet Connecting External EquipmentOn the Remote Control DEMO Mode Adjusting the Volume Turning the Power On and OffBasic Operations Turning the System On Reinforcing the Bass Sound ACTIVE BASS EX Fade-outMuting FADE MUTINGEmphasizing the sound SOUND TURBO Selecting the Sound Mode SOUND MODE Tuning In a Station Using the TunerOne Touch Radio 1Press the FM/AM button Using the Unit Presetting StationsTo Change the FM Reception Mode MONO Disc Number indicator Lights all the time Using the CD PlayerAbout the Disc Indicator To Unload CDs To Load CDsExample of indication One Touch Play Using the CD Player Basics of Using the CD Player- Normal PlayTo Play CDs To Select a Track To Make a Program Programming the Playing Order of the TracksTo Play the Program You Have Made To Exit and Re-enterProgram Play Repeating Tracks Random PlayTray Lock Function Locking the Tray Playing a Tape Using the Cassette Deck Listening to a TapeTo Fast-WindA Tape 3Close the cassette holder gently Things To Know Before You Start Recording Using the Cassette Deck Recording Tape to Tape Recording DUB- BING Standard RecordingCD Synchro Recording To Record Any Sound Source to Tape 1 Set the volume level to the minimum posi- tion Using an External EquipmentListening to the External Equipment 2Press the AUX button Setting the Clock Using the Timers1Press the CLOCK/TIMER button 2Press the 4or ¢button to set the hour Using the Timers Setting the Daily Timer4Setting the OFF time Example PM 1 3Setting the ON time Example AM Turning the Daily Timer On and Off Setting the REC Recording Timer6Setting the volume level 2Press the CANCEL button on the Unit 5Select the preset station for recording Turning the REC Recording Timer On and Offthe display Using the Timers Timer Priority Setting the SLEEP Timer1During playback a source, press the SLEEP button 2Set the length of time you want the source to Compact Discs Care And MaintenanceCassette Tapes Cassette Deck Symptom TroubleshootingPossible Cause Action Accessories Do not service the television yourselfTOLL FREE Authorized Service Centers LIMITED WARRANTY 1 YRWHAT YOU MUST DO FOR WARRANTY SERVICE WHAT IS NOT COVERED Speaker Specifications each unit SpecificationsAccessories Power Specifications VOLUME Se compose de CA-MXKB30et de SP-MXKB30MX-KB30 COMPACT COMPONENT SYSTEM Note to CATV system installer For Canada/pour le CanadaCaution - POWER switch Attention - Commutateur POWER IMPORTANT POUR LES PRODUITS LASER IMPORTANT FOR LASER PRODUCTS Features English1Installation of the System 2Power cord Using the Cassette Deck Recording Using the CD PlayerUsing an External Equipment Using the Timers How To Put Batteries In the Remote Control AccessoriesUsing the Remote Control Getting Started Using the Supplied Wire Antenna Connecting the FM AntennaUsing an FM 75-OhmAntenna Cable not Supplied FM wire antenna supplied Extend the supplied FM Connecting the Speakers Connecting the AM AntennaEnglish Getting Started Connecting to the Wall Outlet Connecting External EquipmentOn the Remote Control DEMO Mode Adjusting the Volume Turning the Power On and OffBasic Operations English Fade-outMuting FADE MUTING On the Remote ControlReinforcing the Bass Sound ACTIVE BASS EX Emphasizing the sound SOUND TURBO Tuning In a Station Using the TunerManual Tuning Using the Unit only Auto Tuning Using the Unit only Presetting Stations Using the TunerUsing the Unit Even if the System is unplugged or if the power About the Disc Indicator Using the CD PlayerDisc Number indicator Lights all the time English To Unload CDs To Load CDsExample of indication English Normal Play Basics of Using the CD PlayerUsing the CD Player During playback using the 4or ¢button Using the Unit On the Remote ControlUsing the Remote Control Programming the Playing Order of the Tracks Using the CD Player 2While pressing down the 7button, press theOn the Remote Control Random Play Playing a Tape Using the Cassette Deck Listening to a TapeEnglish One Touch Play English Using the Cassette Deck RecordingThings To Know Before You Start Recording TAPE A/B TAPE CD Synchro Recording Standard RecordingTape to Tape Recording DUB- BING To Record Any Sound Source to Tape 1 Set the volume level to the minimum posi- tion Using an External EquipmentListening to the External Equipment English Setting the Clock Using the TimersUsing the Unit 1Press the CLOCK/TIMER button Using the Timers Setting the Daily TimerUsing the Unit 4Setting the OFF time Example PM Turning the Daily Timer On and Off Setting the REC Recording Timer6Setting the volume level 2Press the CANCEL button on the Unit Turning the REC Recording Timer On and Off Using the Timers2Press the CANCEL button on the Unit 5Select the preset station for recording Timer Priority Setting the SLEEP TimerUsing the Remote Control To Cancel the SLEEP Timer Setting English Care And MaintenanceCompact Discs Cassette Tapes Troubleshooting SpecificationSymptom Accessories 1203HMMCREBET EN, FR 2003 VICTOR COMPANY OF JAPAN, LIMITED