JVC MX-KB30 Using the Cassette Deck Listening to a Tape, Playing a Tape, English, One Touch Play

Using the Cassette Deck (Listening to a Tape)

7

4

¢

TAPE	0 EJECT
3	(Deck A)
TAPE A/B

¡

7

TAPE A/B

TAPE 3

0 EJECT

(Deck B)

22

English

Deck indicators 3: Tape indicator

*When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.

The Cassette Deck allows you to play, record, and dub audio tapes.

❏Listening to type I tape is suitable for this Cassette Deck.

The use of tapes longer than 120 minutes is not rec- ommended, since characteristic deterioration may occur and these tapes easily jam in the pinch-rollers and the capstans.

One Touch Play

By pressing the TAPE 3 button, the System will come on, and if a tape is in the deck, it will start to play. If no tape is loaded, “NO TAPE” appears on the display, the System will come on and wait for you to insert a tape, or select another function.

Playing a Tape

You can use either Deck A or Deck B at a time for playback.

1 Press the 0 EJECT part for the deck you want to use.

2 When the cassette holder opens, put a cas- sette in, with the exposed part of the tape down, toward the base of the Unit.

The tape will travel from the left to right.

Tape travelling direction

•If the cassette holder does not open, turn the System off, then back on and press the 0EJECT part again.

3Close the cassette holder gently.

When both Deck A and Deck B contain a tape, the last deck to have a tape inserted is selected.

The selected Deck is shown by the Deck indicator “A” or “B”. For example, when the Deck A is selected, the Deck indicator “A” lights up.

•To change the deck, press the TAPE A/B button. Each time you press the button, Deck A or Deck B is alternately selected.

4Press the TAPE 3button.

The Tape indicator (3) blinks on the display and the tape is played back.

The Cassette Deck automatically stops when one side of the tape has finished playing.

To stop playing, press the 7 button.

To remove the tape, stop the tape, and press the 0EJECT part to open the Cassette Holder.

To Fast-Wind A Tape

During playback or in Stop mode, press the ¡(FF) button on the Unit to fast-wind the tape onto the right side of the cassette without playing. (You can also use the ¢button on the Remote Control.) During playback or in Stop mode, press the 22(REW) button on the Unit to fast-wind the tape onto the left side of the cassette with- out playing. (You can also use the 4button on the Remote Con- trol.)

During fast-winding the tape, the Tape indicator (3) goes out. During the fast-winding, the status bar illumination at the bottom of the display moves counterclockwise.

During rewinding, it moves clockwise.

•The Cassette Deck automatically stops when one side of the tape has finished playing.

❏During fast-winding the tape, you can change the tape travelling direction by pressing the ¡(FF) or 22(REW) button.

16