JVC MX-KB30 Using the Timers, English, Turning the REC Recording Timer On and Off, the display

Using the Timers

English

Using the Unit

You can set the time in the same way as for setting the Daily Tim- er.

1Insert a blank or erasable tape into the Deck B and wind past the tape leader.

2Press the CLOCK/TIMER button until “ON TIME” immediately after “REC” appears on

the display.

The Timer indicator ( ) lights and the "REC" indicator blinks.

Each time you press the button, the display changes as follows: DAILY =ON TIME =REC =ON TIME* =Clock setting display = Canceled = (back to the beginning)

*: This item should be selected for the REC Timer setting.

Then, the System enters ON-time setting mode. The current ON time appears on the display and the hour digits blink.

When the timer ON-time comes:

•When the timer ON-time comes, the System automatically turns on. The station you have set is played. The Timer indica-

tor ( ) blinks during timer operation.

To stop timer recording, press the 7 button.

•When the timer OFF-time comes, “OFF” blinks on the display just before the OFF-time and the System automatically turns off.

•The REC Timer works even if the System is turned on.

Turning the REC (Recording) Timer On and Off

Once you have set the REC Timer to record a source, the timer set- ting is stored in memory. So, though the REC Timer turns off once it is used, you can recall it at any time.

To cancel the REC Timer temporarily:

3Setting the ON time you want the System to turn on.

1.Press the 4 or ¢ button to set the hour, then press the SET button.

2.Press the 4or ¢button to set the minute, then press the SET button.

“OFF TIME” appears and then the System enters OFF-time setting mode. The current OFF time appears on the display, and the hour digits blink.

4Setting the OFF time you want the System to turn off.

1.Press the 4 or ¢ button to set the hour, then press the SET button.

2.Press the 4or ¢button to set the minute, then press the

SET button.

The System enter Preset Station Entering mode.

1 Press the CLOCK/TIMER button on the Unit repeatedly until “REC” appears on the dis- play.

2Press the CANCEL button on the Unit.

“OFF” appears and both the Timer indicator ( ) and the “REC” indicator go out.

To activate the cancelled REC Timer:

1 Press the CLOCK/TIMER button on the Unit repeatedly until “REC” appears on the dis- play.

The Timer indicator ( ) lights and the “REC” indicator blinks on the display.

2Press the SET button on the Unit.

“SET” and “OK” successively appear on the display. The Tim- er indicator ( ) and the “REC” indicator remain lit, and the display returns to the original display.

CAUTION:

•If the System is unplugged, or a power failure oc- curs, the timer setting will be lost in a few days. You will need to reset the clock first, then the timer.

5Select the preset station for recording.

1.Press the 4or ¢button to set the band (TUNER FM or TUNER AM), then press the SET button.

2.Press the 4 or ¢ button to set the preset number, then

press the SET button.

“SET” and “OK” successively appear on the dispaly. The “REC” indicator stops blinking and remains lit.

6 Press the STANDBY/ON button to turn off the System, if necessary.

To confirm / change the timer setting, repeat the setting pro-

cedure from the beginning.

23