Pioneer DV-410V-K Connecting using, Output Component video output, To S-Video input

02 Connecting using the S-Video		Connecting using the
	output	component video output

If your TV (or other equipment) has an S-Video (S1) input, you can use the S-Video output on this player instead of the standard (composite) output for a better quality picture.

•Use an S-Video cable (not supplied) to connect the S-VIDEO OUT to an S-Video input on your TV (or monitor or AV receiver).

Line up the small triangle above the jack with the same mark on the plug before plugging in.

To S-Video input

You can use the component video output instead of the standard video out jack to connect this player to your TV (or other equipment). This should give you the best quality picture from the three types of video output available.

•Use a component video cable (not supplied) to connect the COMPONENT VIDEO OUT jacks to a component video input on your TV, monitor or AV receiver.

To component video input

TV

		VIDEO OUT	DIGITAL	AUDIO OUT
	PB		AUDIO OUT	L
			COAXIAL
	PR	Y		R
HDMI OUT	COMPONENT VIDEO OUT		S-VIDEO OUT

TV

		VIDEO OUT	DIGITAL	AUDIO OUT
	PB		AUDIO OUT	L
			COAXIAL
	PR	Y		R
HDMI OUT	COMPONENT VIDEO OUT		S-VIDEO OUT

DV-410V

Watching progressive scan video from the component video outputs

This player can output progressive scan video from the component video output. Compared to interlace video, progressive scan video effectively doubles the scanning rate of the picture, resulting in a very stable, flicker-free image.

To set up the player for use with a progressive scan TV, see Video Output settings on page 37. When the player is set to output progressive scan video, the PRGSVE indicator lights in the front panel display.

12

En