Pioneer P7800DVD Audio Adjustments Setting the speaker setting, Using the cut-off frequency

Audio Adjustments

Setting the speaker setting

You can make a fine adjustment on each speaker installed in your vehicle. You can change the size of each speaker according to the speaker specification. On a spot at which a speaker is not installed, you can set the ad- justment to OFF.

The adjustment you made will be memorized into this unit and you can recall it.

Recalling speaker settings

%Touch SPEAKER SETTING on the sound setting menu to select the speaker setting. Touch SPEAKER SETTING repeatedly to switch between the following speaker settings:

CUSTOM1—CUSTOM2—CUSTOM3—AUTO

—LAST MEMORY

# You can select LAST MEMORY only when the adjusted speaker setting is not memorized in this unit.

# You cannot select AUTO when NETWORK has been selected. (Refer to Switching the DSP setting mode on page 117.)

# When STANDARD has been selected, you cannot select AUTO if auto TA and EQ has not been carried out.

Customizing the speaker setting

You need to make with/without (or yes/no) and size (bass reproducing capacity) selection/ad- justments depending on the installed speak- ers. The size needs to be set to LARGE (large) if the speaker is capable of reproducing sounds of about 100 Hz or below. Otherwise select SMALL (small).

!Low frequency range is not output if the subwoofer is set to OFF and the front and rear speakers set to SMALL or OFF.

!It is imperative that non-installed speakers be set to OFF.

Section

20

!Set the front or rear speaker to LARGE if the speaker is capable of reproducing bass content, or if no subwoofer is installed.

1 Recall the speaker setting you want to adjust.

Refer to Recalling speaker settings on this page.

2 Touch ADJ. next to SPEAKER SETTING on the sound setting menu.

3 Touch or to select the correct size	Audio
for the speaker.
Each time you touch or it selects the size
in the following order:
# When the rear speaker setting is set to OFF,	Adjustments
OFF (off)—SMALL (small)—LARGE (large)
# You cannot select OFF in the front speaker set-
ting.
# You can turn ON or OFF in the subwoofer set-
ting.
the rear center speaker switches to OFF automati-
cally.
Note
You can store the adjusted setting in memory by
using MEMORY. For details concerning opera-
tion, refer to Storing the adjusted audio settings in
memory on page 106.

Using the cut-off frequency

You can adjust the cut-off frequency and slope to match the characteristics of each speaker unit. And then you can store the adjusted cut- off frequency in this unit for later recall.

En 101