Pioneer AVH-P7800DVD operation manual Equalizer List

Audio Adjustments

!The center speaker largely determines the sound image and getting the balance right isn’t easy. We recommend reproducing a 2- ch. audio (a CD for example) and getting the balance right among the speakers ex- cept for the center, and then reproducing a 5.1-ch. audio (Dolby Digital or DTS) and ad- justing the center speaker output to the balance you have already got among the other speakers.

1Touch ADJ. next to PARAMETRIC EQ on the sound setting menu.

2Touch LR Common/LR Independent to switch the equalizer adjustment method.

!LR Common – Adjusts left and right speak- ers simultaneously.

!LR Independent – Adjusts left and right speakers separately.

3Touch EQ to select the equalizer.

Touch EQ repeatedly to switch between the fol- lowing equalizers:

POWERFUL—NATURAL—VOCAL—FLAT— CUSTOM1—CUSTOM2—CUSTOM3—

LAST MEMORY—SUPER BASS (S. BASS)

#You can also select the equalizer by using

EQUALIZER LIST.

#To close the equalizer curve list, touch CLOSE.

#You can select LAST MEMORY only when the adjusted equalizer curve is not memorized in this unit.

4Touch or next to SPEAKER to select the speaker to be adjusted.

Touch or until the desired speaker appears in the display.

FRONT LEFT (front left speaker)— FRONT RIGHT (front right speaker)— REAR LEFT (rear left speaker)—REAR RIGHT (rear right speaker)—FRONT CENTER (front center speaker)—REAR CENTER (rear center speaker)

Section

20

#You can mute the selected speaker unit by touching . To cancel muting, touch .

#You cannot select speakers whose size is set at OFF.

5 Touch BAND to select the equalizer band to be adjusted.

Each time you touch BAND it selects equalizer bands in the following order:

LOW (low)—MID (mid)—HIGH (high)

6 Touch or to select the center fre-
quency of selected band.		Audio
40—50—63—80—100—125—160—200—
Touch	or until the desired frequency ap-
pears in the display.		Adjustments
250—315—400—500—630—800—1k—

1.25k—1.6k—2k—2.5k—3.15k—4k—5k— 6.3k—8k—10k—12.5k (Hz)

# You can select a center frequency from among 20 frequencies for each band. You can change the center frequency in 1/3-octave steps, but you cannot select frequencies that have inter- vals shorter than 1 octave among the center fre- quencies of the three bands.

7 Touch or to adjust the equalizer level.

Each time you touch or it increases or decreases the equalizer level. +12dB to –12dB is displayed as the level is increased or de- creased.

#When you adjust the speaker loudness with selecting LR Common, the equalizer levels of both side speakers are changed simultaneously. Thus, if the equalizer level of one speaker is at maximum or minimum, the level of the other speaker is at full limit in opposite direction.

8Touch Q.Fac to select the desired Q fac-

tor.

Each time you touch Q.Fac it switches be- tween the following Q factor:

1.2 (wide)—3.6 (narrow)

En 99