Pioneer P7800DVD Other Functions Selecting the background display, Adjusted position data

Other Functions

Selecting the background display

You can display the thumbnails of available background pictures/visuals and select one to set your background display. The selection can be made each for the audio source group (playing CD, listening to Tuner, etc.), telephone source and the movie source group (watching DVD, AV, etc.).

1 Press ENTERTAINMENT.

Thumbnails of background pictures/visuals appear on the display.

2Touch one of the thumbnails that you want to display in the background.

The selected picture/movie is displayed at the background.

Note

In the following cases, background images from that source cannot be selected:

!When there is no disc in the unit.

!When the AV (AV input) is not set to VIDEO (refer to page 109).

Adjusting the response positions of the touch panels (Touch Panel Calibration)

If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response po- sitions of the touch panel. There are two ad- justment methods: 4-point adjustment, in which you touch four corners of the screen; and 16-point adjustment, in which you make fine-adjustments on the entire screen.

!Make sure to use the supplied pen for ad- justment, and gently touch the screen. If you press the touch panel forcefully, the

Section

24

touch panel may be damaged. Do not use a sharp pointed tool such as ballpoint pen or a mechanical pen. Otherwise the screen is damaged.

1Press V.ADJUST to display

PICTURE ADJUSTMENT.

2Press and hold V.ADJUST.

The 4-point touch panel adjustment screen ap- pears.

3Touch each of the arrows on the four corners of the screen with the touch panel adjustment pen.

# To cancel the adjustment, press and hold V.ADJUST.

4Press V.ADJUST to complete the 4-point adjustment.

The adjusted position data is saved.	Other
! Do not turn off the engine while saving the
adjusted position data.	Functions
5 Press V.ADJUST to proceed to the 16-
point adjustment.
The 16-point touch panel adjustment screen
appears.
# To cancel the adjustment, press and hold
V.ADJUST.
6 Gently touch the center of the + mark
displayed on the screen with the touch
panel adjustment pen.
After you touch all the marks, the adjusted po-
sition data is saved.
! Do not turn off the engine while saving the
adjusted position data.
7 Press and hold V.ADJUST to complete
the adjustment.

En 121