Section
04
Basic Operations
3Touch ESC to return to the display of each source.
Operating the menu by using the joystick
You can also perform most of the menu items by using the joystick.
!Switch the remote control operation mode to AVH to operate the menu by using the joystick on the remote control. (Refer to page 21.)
1Click the joystick during display of each source to display AUDIO MENU.
AUDIO MENU appears on the display.
2Move the joystick left or right to dis- play the function names you want to oper- ate.
3Move the joystick to select the desired function.
4Press BAND/ESC to return to the display of each source.
# You can return to the previous display by pressing BACK. 
—When the ignition switch is turned ON again (or turned to ACC), the LCD panel will be opened automatically.
—Removing or attaching the front panel will automatically close or open the LCD panel. (Refer to the next page.)
!When the ignition switch is turned OFF after the LCD panel has been closed, turn- ing the ignition switch ON again (or turning it to ACC) will not open the LCD panel. In this case, press OPEN/CLOSE to open the LCD panel.
!When closing the LCD panel, check to make sure that it has closed completely. If the LCD panel has stopped halfway, leaving it like this could result in damage.
CAUTION
Keep hands and fingers clear of the unit when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fin- gers.
%Press OPEN/CLOSE to open the LCD panel.
# To close the LCD panel, press OPEN/CLOSE again.
Opening and closing the LCD panel
The LCD panel will be opened or closed auto- matically with the turning of the ignition switch on or off. You can turn off the automatic close/open function. (Refer to page 110.)
!The automatic close/open function will op- erate the display as follows.
—When the ignition switch is turned OFF while the LCD panel is opened, the LCD panel will close after six seconds.
Adjusting the LCD panel angle
Important
!If you can hear the LCD panel knocking against your vehicle’s console or dashboard, touch TILT (
) to move the LCD panel a little forward.
26
En
