Pioneer P7800DVD Audio Adjustments, Audio setup procedure, Standard mode, Network mode

Audio Adjustments

!DVD video

!Video CD

!CD (CD-DA)

!DTS-CD

!Compressed audio (MP3/WMA/AAC) files

!DivX video files

Notes

!XM tuner and SIRIUS tuner are set to the same value automatically.

!External unit 1 and external unit 2 are set to the same value automatically.

Custom settings (CUSTOM1, CUSTOM2 and CUSTOM3)

Following functions can store the settings in the custom settings (CUSTOM1, CUSTOM2 and CUSTOM3). Custom settings are com- mon to Sound settings (SETTING1, SETTING2 and SETTING3).

!Speaker setting (SPEAKER SETTING)

!Cut-off frequency setting (CUT OFF)

!Time alignment setting

(TIME ALIGNMENT)

!Speaker level setting (SPEAKER LEVEL)

!Parametric equalizer setting

(PARAMETRIC EQ) (when selecting multi- channel mode only)

!Graphic equalizer setting (GRAPHIC EQ) (when selecting 2-channel mode only)

Audio setup procedure

Standard mode

First, perform Auto TA and EQ. Auto TA and EQ creates finely-tuned sound field for both 2- channel mode and multi-channel mode ac- cording to your vehicle interior acoustic char- acteristics. (Refer to Auto TA and EQ (auto-time alignment and auto-equalizing) on page 106.) If AUTO TA and EQ has been completed, sound setting is set to AUTO.

Section

20

Basically, that’s all you need to do to adjust the audio setting and no other fine tuning is necessary.

However, according to your wishes, it is possi- ble to customize audio settings based on Auto TA and EQ settings. By carrying out the follow- ing settings/adjustments in the order shown, you can customize sound field effortlessly.

! Switching the sound settings
(SOUND SETTING)
! Customizing the speaker setting
(SPEAKER SETTING)
! Using the cut-off frequency (CUT OFF)			Audio
! Adjusting the time alignment
(TIME ALIGNMENT)
! Adjusting the speaker output levels
(GRAPHIC EQ) (when selecting 2-channel			Adjustments
(SPEAKER LEVEL)
! Adjusting 3-band parametric equalizer
(PARAMETRIC EQ) (when selecting multi-
channel mode only)
! Adjusting 13-band graphic equalizer
mode only)
Network mode
Make sure of the following settings before per-
forming finely audio adjustments.
Function	Setting	Page
Digital Direct	OFF	93
PARAMETRIC EQ/	FLAT	98, 100
GRAPHIC EQ
FADER/BALANCE	FRONT 0/REAR 0/	92
	LEFT 0/RIGHT 0
Dolby/DTS	OFF	94

By carrying out the following settings/adjust- ments in the order shown, you can create a fi- nely-tuned sound field effortlessly.

!Switching the sound settings

(SOUND SETTING)

!Using the position selector (POSITION)

En 91