OPERATION
Using the Start( ) +30 s Button
This is a ONE TOUCH COOK pad.
By touching the pad once, you can start heating instantly for 30 seconds.
You can increase the cooking time by pressing the Start( ) +30 s button during heating.
Cooking time increases by 30 seconds button with each press of the Start( ) +30 s button, but it can not exceed the maximum time of 30 minutes.
Like traditional cooking, you may find that you have to adjust the cooking times slightly. You can:
•Check how cooking is progressing at any time simply by opening the door.
•After checking, close the door.
•Increase the remaining cooking time if necessary.
Before operating the oven, times can be increased using either the time pads or Start( ) +30 s button. During operation, time may only be added by using the Start( ) +30 s button.
Using the Cancel ( ) Button
•To stop cooking, erase instructions, and return the oven display to period(·): press Cancel ( ) Button.
•To correct a mistake you have just entered: press Cancel ( ) once, then
Error Codes
Error Items | Code Error Beep |
| Cause/Remedy | |
Low |
| Low Batt. Voltage/ | ||
Voltage |
| Check the | ||
|
| Batt(Min. 11.5V) | ||
High |
| High Batt. Voltage/ | ||
Voltage |
| Check the | ||
|
| Batt(Max. 15.5V) | ||
No | Beep 6 |
|
| |
times |
|
| ||
Acknowledge | EEPROM(internal | |||
| ||||
| memory IC) error/ | |||
|
| |||
| Call service center | |||
|
|
| ||
Error |
|
|
| |
No current |
| No current or over | ||
|
| current. | ||
|
| Press the Cancel | ||
|
| ( | ) button. | |
Over current |
| Press the | ||
|
| Start( ) +30 s | ||
|
| button after | ||
|
| setting up cooking | ||
|
| time. Call Service | ||
|
| Center | ||
|
| (Displaying three | ||
|
| time continuous | ||
|
| “nC” or ”oC”). |
14OPERATION