TROUBLESHOOTING
PROBLEM | POSSIBLE CAUSE | SOLUTION |
|
|
|
Unit emits odor during operation | First use of unit, or after | Odor development can arise upon |
| storage of unit in dusty | first use and after a long period |
| area. | of |
|
| |
|
| areas (e.g. dusty areas). Run the unit |
|
| for ½ a day. The smell will dissipate |
|
| after awhile. In the case of intense |
|
| odor development, air the room. |
|
|
|
Compressor does not immediately | Normal operation | After pressing Power button ON, |
activate when power button is |
| the compressor will not start for 3 |
pressed ON |
| minutes. Conditioned air will start to |
|
| blow once the compressor starts, but |
|
| it may take up to another 5 minutes |
|
| to feel the cooling or warming |
|
| effect in the room. |
|
|
|
The unit deactivates | Normal operation | Upon reaching the set temperature, |
|
| the unit switches off automatically. |
|
| Check temperature setting. |
|
|
|
The unit does not cool | Room temperature is high | Air conditioners operate more |
satisfactorily | when unit is first turned ON | effectively if a cooler room |
|
| temperature is maintained. To |
|
| adequately cool the air in a very |
|
| warm room requires much more time |
|
| and energy. |
| Unit is located outdoors | Move unit indoors. |
| and outside air temperature |
|
| is very high. Unit will |
|
| only provide air that is |
|
| approximately 20° cooler |
|
| than outside air. |
|
|
|
|
ERROR CODES |
|
|
|
|
|
E1 | Room temperature outside | If the error code continues to |
| the usable operating range | appear, call |
|
| arrange for product inspection and |
|
| repair. |
|
|
|
E2 | Temperature of the | If the error code continues to |
| refrigerant lines is too high | appear, call |
| or low | arrange for product inspection and |
|
| repair. |
|
|
|
E4 | Water tank full | If the water tank is full, the warning |
|
| sign “E4” appears in the display. To |
|
| restart operation of the unit, please |
|
| remove the plug of the lower drain |
|
| outlet to allow the water to drain |
|
| out. Please use an appropriate |
|
| collection pan. When the water |
|
| has been completely removed, start |
|
| the unit again. The unit can now be |
|
| used as usual. |
|
|
|
DF | This procedure is completely normal | |
|
| and protects the system from |
|
| icing and failure. The unit starts |
|
| automatically after approx. 15 |
|
| minutes (depending on the function |
|
| setting). This procedure repeats itself |
|
| regularly. |
|
|
|
NOTES
22 | 23 |
