Kambrook KFH310 manual Using Your Upright Fan Heater, Before First Use, Turning Your Heater On

Models: KFH310

1 6
Download 6 pages 21.05 Kb
Page 5
Image 5
Using Your Upright Fan Heater

Using Your Upright Fan Heater

Before First Use

Remove any promotional material and packaging from the heater.

Unwind the cord to its full length and place the heater on a firm, level surface in a stable, upright position. Visually inspect the air inlet and outlets to ensure there are no blockages.

Turning Your Heater On

Ensure the Mode dial is turned to the OFF position and turn the Variable Thermostat dial to the MAX setting.

Plug the cord into a 230V or 240V power point and switch on.

NOTE: To avoid an electrical circuit overload, it is recommended that no other appliances are plugged into the same circuit as your heater, when it is in use.

Setting the Heating Mode and Variable Temperature

To control the heater, turn the Mode dial and the Variable Thermostat dial as follows.

The Mode dial has 4 settings: OFF - Shuts off the heater and fan Before First UseTurning Your Heater On - For fan only operation

1 - Low heat setting (1200 watts)

2 - High heat setting (2400 watts)

The Variable Thermostat dial acts as an automatic thermostat and can be used to maintain your desired temperature.

Turn the Mode dial to setting 2 and the Variable Thermostat dial to MAX setting. Once a comfortable room temperature has been reached, slowly turn the Variable Thermostat dial anti-clockwise until a click sound is heard.

At this setting, your heater will automatically cycle on and off to maintain the desired room temperature.

Turn the heater off by turning the Mode dial to the OFF position.

NOTE: This heater features a tip- over switch. If the heater tips over, it will automatically switch off. Once placed back into the upright position, the heater will automatically switch on again.

ThermoGuard Overheating Safety Device

Your heater is fitted with a safety device that switches off the heater in the event of overheating. Should this heater stop working, turn off the heater and inspect the air inlet and outlet for blockages. Wait at least five minutes for the protection system to reset before attempting to restart the heater.

If the heater fails to operate or the safety device switches off again, return the heater to your nearest Kambrook Service Centre for examination or repair.

8

9

Page 5
Image 5
Kambrook KFH310 manual Using Your Upright Fan Heater, Before First Use, Turning Your Heater On