Kenmore 790.9031 manual Operating oven light on some models, Oven Lockout, Setting Bake, will turn

Setting Oven Controls

Oven Lockout	OVEN
	LOCKOUT

The control may be programmed to lockout the oven control key pads and oven door.

To activate OVEN LOCKOUT feature:

1. Be sure oven door is completely dosed.

[]

2. Press and hold STOPkey pad for 3 seconds. Loc will

appear in the display. The DOOR LOCKED indicator light will flash and the motor driven door latch mechanism will begin locking the oven door

automatically. Do not open the oven door at this time. Allow about 15 seconds for the oven door to completely lock. Once the oven door is locked, the time of day will appear in the display.

To cancel OVEN LOCKOUT feature:

[]

1.Press and hold STOPkey pad for 3 seconds. The DOOR LOCKED indicator light will flash and the motor driven door latch mechanism will begin to unlock the oven door. Do not open the oven door at this time. Allow about 15 seconds for the oven door to completely unlock.

2.The oven control key pads will be available and the oven door may be opened.

Important notes:

°To avoid possible damage to the oven door latch mechanism, do not attempt to open or close the oven door whenever the DOOR LOCKED indicator light is flashing.

If a control key pad is pressed when OVEN LOCI<OUT is active, Loc wiii appear in the display as a reminder that the key pad action is not available when the OVEN LOCKOUT feature is active.

Operating oven light [on some models)

The interior oven light will automatically turn ON when the oven door is opened.

Press the rocker switch marked OVEN LIGHT on the control panel to turn the oven light ON or OFF whenever the oven door is closed.

The oven light is located at the upper left rear wail of the oven interior and is covered with a glass shield held by a wire hoiden The gloss shield protects the bulb from high temperatures and should always be in place whenever the

oven is in use.

Setting Bake

Use the baize function whenever the recipe calls for baking using normal temperatures. A reminder tone will sound when the set bake temperature is reached. Bake may be programmed for any temperature from 170°F to 550°F (77°C to 287°C). The factory preset bake temperature is 350°F (177°C).

To set Bake:

1. Arrange oven racks and close oven door.

2. Press Bake key pad. o appears in display.

. Within 5 seconds, press A or V" The display will show the default oven temperature of 350°F (177°C). By

pressing A or V, the oven temperature may be adjusted in 5°F increments (1°C if the control is set to display Celsius).

4.	As soon		as the A		or V		key	pad	is released,		the
	oven	will		begin	heating	to the selected			temperature.
	When	the		oven	temperature		reaches		the	set
	temperature,			the	PREHEAT		indicator		light	will turn	off
	and	the	oven control			will	beep	3 times.

To cancel bake at anytime:

Press STOP •

To change the oven temperature after Bake has started:

1.Press Bake key pad. The current set oven temperature will display.

2.Press theA or V pad to increase or decrease the current set temperature to the new oven temperature.

Always use pot holders or oven mitts when using the oven. When cooking, the oven interior, oven racks and cooktop will become very hot which can cause burns.

Important notes:

•The oven will baize no longer than 12 hours. If you wish to continuously bake, see Changing between continuous baize setting or 12-Hour Energy Saving mode for detailed information.

Dark or dull pans absorb more heat than shiny

bakeware resulting in dark or overbrowning of foods. It may be necessary to reduce the oven temperature or cook time to prevent overbrowning of some foods. Dark pans are recommended for pies. Shiny pans are recommended for cakes, cookies and muffins.

14