Kenmore 790.9031 manual Read before starting Select Clean, VERY HOT and, Any Aluminum Foil

Models: 790.9031

1 32
Download 32 pages 8.61 Kb
Page 20
Image 20
Select Clean

Select Clean

A self-cleaning oven cleans itself with high temperatures (well above normal cooking temperatures) which eliminate soils completely or reduces them to a fine powdered ash you can wipe away aftwerwards with a damp cloth.

The Select Clean function allows you to select 3 different cleaning times from 2, 3 or 4 hours. A 3-hour cleaning time is best used for normal cleaning; 2-hour time for light soils and a 4-hour clean time for heavier stubborn soils.

Read before starting Select Clean

Be sure to read all the following caution and important

statements BEFORE starting a self-clean cycle:

!I_

DO NOT leave small children unattended

near the appliance. During the self-cleaning cycle, the

outside of the range can become very hot to touch and can

Cause burns.

!I_

DO NOT llne the oven walls, racks, bottom

or any other part of the range with aluminum foil. Doing

so will destroy heat distribution, produce poor baking

results and cause permanent damage to the oven interion Aluminum foil will melt to the interior of the oven.

The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any range. Move birds to another well-ventilated room.

DO NOT force the oven door open. This can

damage the automatic door locking system.

 

 

Use caution when opening the oven door

after

self-cleaning.

The

oven

may

still be

VERY HOT and

can cause

burns.

To avoid

possible

burns

stand

to

the

side

of the

oven

when

opening

the

oven

door

to allow

hot

air or

steam

to escape.

 

 

 

 

 

 

 

 

 

important

notes:

 

 

 

 

 

 

 

 

 

* Completely

remove

ALL

OVEN

RACKS

and

ANY

 

ACCESSORIES FROM OVEN CAVITY to avoid damage

to oven racks. If the oven racks are not removed they may discolon

*Remove ALL items from the oven and cooktop including

cookware,

utensils

and

ANY ALUMINUM FOIL.

 

Aluminum

foil will

not

withstand

high temperatures

from

a self-clean

cycle

and

will melt.

 

 

" DO NOT use oven cleaners or oven protective coatings in or around any part of the oven interior.

°Clean any soil from the oven frame, the door liner outside the oven door gasket and the small area at the front center of the oven bottom (See Fig. 1). These areas

heat sufficiently to burn soil on. Clean using soap and

water prior to starting Select Clean (See Fig. 1).

*Remove any excessive spillovers. Any spills on the oven

bottom should be wiped-up and removed before starting

a self-clean cycle. To clean, use hot, soapy water and a

cloth. Large spillovers can cause heavy smoke or fire

when subjected to high temperatures. DO NOT allow food spills with a high sugar or acid content (such as

milk, tomatoes, sauerkraut, fruit juices or pie filling) to remain on the surface as they may leave a dull spot even after cleaning.

°DO NOT clean the oven door gasket (See Fig. 1). The

woven material of the oven door gasket is essential for a

good seal. Care should be taken not to rub, damage or

remove the gasket. DO NOT use any cleaning materials on the oven door gasket. Doing so could cause damage to the door gasket.

Fig. 1

Setting Select Clean

To set Select Clean to start immediately:

1.Be sure the oven is empty and ALL oven racks are

removed. Remove all items from the cooktop. Be sure

oven door is completely closed.

2. Press Select Clean key pad.

appears

in the

display.

 

 

3. Press A or V once. 3:00 appears in the display indicating the default 3 hour clean time is selected. To

change to a 2 hour clean time press V; "2:00" appears in the display. To select a 4 hour clean time

press A ; "4:00" appears in the display.

4.After selecting the clean time Select Clean will activate. The DOOR LOCKED indicator light will glow and CLn will appear in the display.

2O

Page 20
Image 20
Kenmore 790.9031 manual Read before starting Select Clean, VERY HOT and, Any Aluminum Foil, Setting Select Clean