Siemens 6AU1900-1AB32-0BA0 configurationmanual Change arc sine curve definition range

Functions

4.6 Arc Sine Curve

2.Enter the new position and the number of interpolation points in the Position tab and click OK. The arc sine curve is shown at the new positions. The arc sine curve is saved by the system as an interpolation point table.

Figure 4-14 Position tab

4.6.3Change arc sine curve definition range

Requirements

The cam is opened with SIMOTION CamTool.

Change arc sine curve definition range

To change the definition range of an arc sine curve:

1.Select the arc sine curve in the S diagram (distance diagram). The current position of the arc sine curve is shown in the tooltip.

2.The arc sine curve is shown with handles. The handles for the definition range are shown in green. Point to a green handle. The mouse pointer shows the direction in which you can move the handle.

4-18	CamTool
	Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0