![](/images/new-backgrounds/1291250/29125049x1.webp)
Configuring 3.3 Editing a Cam with CamTool
2. Click a diagram to show the Cam menu.
)L[HGSRLQW
6GLDJUDPGLVWDQFHGLDJUDP
6HJPHQWERXQGDU\6HJPHQWERXQGDU\
,QWHUSRODWLRQFXUYHWUDQVLWLRQ
9GLDJUDPYHORFLW\GLDJUDP
$GLDJUDPDFFHOHUDWLRQGLDJUDP
Figure 3-7 Cam segment replaced by SIMOTION CamTool with fixed point and transition (interpolation polynomial)
3.Click the menu Cam > Import. The file selection window is displayed.
Navigate under Find in to the text file that contains the cam and select the text file. The name of the text file is entered under Name.
4.Click OK in the file selection window. The cam is imported.
Notice
When you import a cam from a text file and have previously changed the displayed cam, a window appears. You can accept the changed cam into the project via the window. The cam is then imported from the text file.
CamTool | |
Configuration Manual, 12.2004, |