Siemens 6AU1900-1AB32-0BA0 Delete interpolation point, Changing an Interpolation Point Position

Functions

4.7 Interpolation point

Changing an Interpolation Point Position

To change the position of an interpolation point:

1.Select the interpolation point in the S diagram (distance diagram). The position of the interpolation point is shown in the tooltip.

2.Move the interpolation point with drag&drop to the new position.

or

1.Double-click the interpolation point. The Interpolation Point Properties window appears.

2.Enter the new position in the Position tab and click OK. The interpolation point is displayed at the new position.

Figure 4-17 Position tab

4.7.4Delete interpolation point

Requirements

The cam is opened with SIMOTION CamTool.

Delete interpolation point

To delete an interpolation point:

1.Select the interpolation point that you want to delete.

2.Press the DEL key. The interpolation point is deleted and the representation of the cam adjusted in all diagrams.

4-22	CamTool
	Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0