Siemens 6AU1900-1AB32-0BA0 Change fixed point position, Change velocity at fixed point

Functions 4.3 Fixed point

4.3.3Change fixed point position

Requirements

The cam is opened with SIMOTION CamTool.

Change fixed point position

To change the position of a fixed point:

1.Select the fixed point in the S diagram (distance diagram). The position of the fixed point shown in the tooltip.

2.Move the fixed point with drag&drop to the new position.

or

1.Double-click the fixed point. The Fixed Point Properties window appears.

2.Enter the new x- or y-position of the fixed point in the Position tab and click OK. The representation of the fixed point in the diagram will be updated and displayed at the new position.

4.3.4Changing the velocity at the position of a fixed point:

Requirements

The cam is opened with SIMOTION CamTool.

Change velocity at fixed point

To change the velocity at the fixed point position:

1.The velocity at a fixed point position is represented by a handle in the V diagram (velocity diagram).

Select the handle. The mouse pointer shows the direction in which you can move the handle.

2.Move the handle with drag&drop to the new position.

or

1.Double-click the fixed point. The Fixed Point Properties window appears.

2.Enter the new velocity as specified in the following table in the Dynamic response tab and click OK. The handle in the V diagram (velocity diagram) is shown at the new position.

CamTool	4-5
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0