Class A Chimney System
Roof Flashing and Storm Collar
Joist Shield/Firestop
Mobile Home Approved Double
Wall Chimney Connector
Use silicone to create a vapor barrier where the chimney passes through to exterior.
Chimney Cap/Spark Arrestor

INSTALLATION

WARNING

DO NOT INSTALL IN A SLEEPING ROOM.

CAUTION

THE STRUCTURAL INTEGRITY OF THE

MANUFACTURED HOME FLOOR, WALL AND

CEILING/ROOF MUST BE MAINTAINED.

Mobile Home Installation

Caution

NEVER draw outside combustion air from:

Wall, floor or ceiling cavity or

enclosed space such as an attic, garage or crawl

space.

• The wood stove MUST be secured to the floor of the mobile home using lag bolts and the holes provided in the bottom of the unit for this

purpose.

• The wood stove must be connected to the chimney system with double wall chimney connector which is UL listed for use in mobile and manufactured homes.

•Carefully follow all clearances listed in the

appropriate section of this manual AND follow the venting manufacturer’s minimum clearance requirements. Similarly, be certain the venting system used is approved for mobile home use.

• Installation must be in accordance with Manufacturers Home & Safety Standard (HUD)

CFR 3280, Part 24 as well as any applicable local codes.

Outside Combustion Air

•The use of outside combustion air is mandatory when installing this wood stove in a mobile or manufactured home.

•The outside air connection pipe protrudes from the bottom center of the stove; a kit is available from England’s Stove Works, Inc. designed for connecting this unit to outside combustion air. [Part No. AC‐OAK5]

•If it is not feasible to use the AC‐OAK5 outside air hookup kit in your stove installation, other materials may be used, provided the following rules are followed:

oThe pipe used for outside air hookup must be metal, with a minimum thickness of .0209in. (25 gauge mild steel) or greater and an inside diameter of approximately 4.25in.

oKeep pipe runs short and use a mechanical fastener at each pipe joint.

oA screen or other protection device must be fitted over the outside air termination point to prevent rain, debris and nuisance animals from entering the piping system. Inspect the outside combustion air inlet for block and debris monthly.

Page 14

Page 13 Page 15
Page 14
Image 14
England's Stove Works 17VL, 50SVL17, 50TVL17 manual Installation
Page 13 Page 15

50SVL17, 17VL, 50TVL17 specifications

England's Stove Works is renowned for manufacturing high-quality wood and pellet stoves, and their models 50TVL17, 17VL, and 50SVL17 are excellent representations of their commitment to efficiency, functionality, and design. These stoves are designed to meet various heating needs while promoting sustainability and comfort.

The 50TVL17 is a versatile pellet stove that boasts a powerful yet efficient heating capability. With an impressive 50,000 BTU output, this model can heat spaces up to 2,200 square feet, making it ideal for both large and small homes. One of its standout features is the large hopper capacity, allowing for extended burn times without the need for frequent refueling. Additionally, the 50TVL17 comes with an automatic ignition system that ensures quick and reliable starts, enhancing user convenience.

The 17VL, on the other hand, is known for its compact design and high efficiency, capable of heating areas up to 1,500 square feet. This stove operates with a maximum output of 30,000 BTU, making it suitable for standard-sized rooms. It features a simple and efficient feed system, which not only promotes consistent heat output but also reduces pellet consumption. The 17VL is equipped with a programmable thermostat for precise temperature control, allowing users to set their desired warmth and leave the rest to the stove.

The 50SVL17 is another stellar offering, combining the benefits of both wood and pellet heating. This multi-fuel stove boasts a stunning design that can complement various home decors while providing effective heating solutions. With a robust construction and a 50,000 BTU capacity, it can also heat larger spaces, featuring an adjustable blower for optimal heat distribution. The 50SVL17 focuses on minimizing emissions, leveraging advanced combustion technologies that meet and often exceed environmental regulations.

Each of these models incorporates user-friendly features like easy-to-clean designs and large viewing windows that showcase the beautifully burning flames. England's Stove Works has also ensured that safety is paramount, with built-in overheat protection and exhaust safety features.

Overall, the 50TVL17, 17VL, and 50SVL17 from England's Stove Works stand out not only for their impressive heating performance but also for their thoughtful design and eco-compatible technologies. These models are perfect for anyone seeking an efficient and stylish way to heat their spaces while being mindful of their environmental impact.
Top Page Image Contents