INSTALLATION

Venting Introduction

This wood stove operates on a natural draft system, in which the chimney system pulls air through the stove. This unit must be installed in accordance with the following detailed descriptions of venting techniques; not installing the stove in accordance with the details listed here can result in poor stove performance, property damage, bodily injury or death. Avoid make‐shift compromises when installing the venting system. England’s Stove Works is not responsible for any damage incurred due to a poor or unsafe installation.

Be certain that all aspects of the venting system are installed to the venting manufacturer’s instructions, particularly the required clearances to combustibles. Also, be certain to use an attic radiation shield to prevent insulation from contacting a chimney which passes through an attic.

The chimney system is the “engine” which drives a wood stove, so it is imperative for proper unit function that the venting system be installed exactly as described in the following section.

If questions arise pertaining to the safe installation of the stove, our Technical Support line (800‐245‐6489) is available.

Contact your local code official to be certain your installation meets local and national fire codes, and if you’re uncertain about how to safely install the stove, we strongly recommend contacting a local NFI certified installer to perform the installation.

Venting Guidelines

•ALWAYS install vent pipe in strict adherence to the instructions and clearances included with your venting system.

•DO NOT connect this wood stove to a chimney flue which also serves another appliance.

•DO NOT install a flue pipe damper or any other restrictive device in the exhaust venting system of this unit.

•USE an approved wall thimble when passing through a wall and a ceiling support/fire stop when passing through a ceiling.

•INSTALL three sheet metal screws at every chimney connector joint.

•AVOID excessive horizontal runs and elbows, as both will reduce the draft of the venting system and will result in poor stove performance.

•INSPECT your venting system often, to be certain it is clear of creosote, fly‐ash and other restrictions.

•CLEAN the venting system as detailed in the maintenance section of this manual.

•ADHERE to the 10‐3‐2 rule regarding chimney terminations.

•INSTALL single wall chimney connector with the male end down to prevent creosote leakage. Follow double wall chimney connector manufacturer’s instructions regarding proper pipe installation.

WARNING: Venting system surfaces get HOT, and can cause burns if touched. Noncombustible shielding or guards may be required.

Page 8

Page 7 Page 9
Page 8
Image 8
England's Stove Works 17VL, 50SVL17, 50TVL17 manual Installation
Page 7 Page 9

50SVL17, 17VL, 50TVL17 specifications

England's Stove Works is renowned for manufacturing high-quality wood and pellet stoves, and their models 50TVL17, 17VL, and 50SVL17 are excellent representations of their commitment to efficiency, functionality, and design. These stoves are designed to meet various heating needs while promoting sustainability and comfort.

The 50TVL17 is a versatile pellet stove that boasts a powerful yet efficient heating capability. With an impressive 50,000 BTU output, this model can heat spaces up to 2,200 square feet, making it ideal for both large and small homes. One of its standout features is the large hopper capacity, allowing for extended burn times without the need for frequent refueling. Additionally, the 50TVL17 comes with an automatic ignition system that ensures quick and reliable starts, enhancing user convenience.

The 17VL, on the other hand, is known for its compact design and high efficiency, capable of heating areas up to 1,500 square feet. This stove operates with a maximum output of 30,000 BTU, making it suitable for standard-sized rooms. It features a simple and efficient feed system, which not only promotes consistent heat output but also reduces pellet consumption. The 17VL is equipped with a programmable thermostat for precise temperature control, allowing users to set their desired warmth and leave the rest to the stove.

The 50SVL17 is another stellar offering, combining the benefits of both wood and pellet heating. This multi-fuel stove boasts a stunning design that can complement various home decors while providing effective heating solutions. With a robust construction and a 50,000 BTU capacity, it can also heat larger spaces, featuring an adjustable blower for optimal heat distribution. The 50SVL17 focuses on minimizing emissions, leveraging advanced combustion technologies that meet and often exceed environmental regulations.

Each of these models incorporates user-friendly features like easy-to-clean designs and large viewing windows that showcase the beautifully burning flames. England's Stove Works has also ensured that safety is paramount, with built-in overheat protection and exhaust safety features.

Overall, the 50TVL17, 17VL, and 50SVL17 from England's Stove Works stand out not only for their impressive heating performance but also for their thoughtful design and eco-compatible technologies. These models are perfect for anyone seeking an efficient and stylish way to heat their spaces while being mindful of their environmental impact.
Top Page Image Contents