Siemens 6AU1900-1AB32-0BA0 Straight line, Delete fixed point, Definition straight line

Functions 4.4 Straight line

1.Double-click the fixed point. The Fixed Point Properties window appears.

2.In the Dynamic response tab, activate the option Manual input and enter the new acceleration.

3.Click OK. The handle in the A diagram (acceleration diagram) is shown at the new position.

Notice

To specify an absolute slave acceleration, you must select an absolute master velocity for calculations in the Simulation Settings window.

4.3.6Delete fixed point

Requirements

The cam is opened with SIMOTION CamTool.

Delete fixed point

To delete a fixed point:

1.Select the fixed point that you want to delete.

2.Press the DEL key. The fixed point is deleted and the representation of the cam adjusted in all diagrams.

4.4Straight line

4.4.1Definition straight line

Definition

The cam consists of individual cam segments. Under SIMOTION CamTool, you can use fixed points, straight lines, sine curves, arc sine curves and interpolation points as cam segments.

A straight line defines a synchronous distance in the cam. You can specify the velocity along the straight line.

CamTool	4-7
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0