Siemens 6AU1900-1AB32-0BA0 configurationmanual Changing the interpolation point position

Functions 4.7 Interpolation point

The interpolation point is displayed in the diagram. The position of the interpolation point is shown in the tooltip.

Figure 4-16 Insert interpolation point

Notice

Once the function Cam > Insert > Interpolation point is activated, you can insert interpolation points in the S diagram (distance diagram) until

•you press the ESC key,

•you press the right mouse button (this activates the selection tool in the toolbar) or

•you activate another cam segment (fixed point, straight line, sine curve, arc sine curve) for insertion.

4.7.3Changing the interpolation point position

Requirements

The cam is opened with SIMOTION CamTool.

CamTool	4-21
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0