Siemens 6AU1900-1AB32-0BA0 configurationmanual Change sine curve position

Functions 4.5 Sine curve

4.5.2Change sine curve position

Requirements

The cam is opened with SIMOTION CamTool.

Change sine curve position

To change the position of a sine curve:

1.Select the sine curve in the S diagram (distance diagram). The current position of the sine curve is shown in the tooltip.

2.The sine curve is shown with handles. Point to a handle. The mouse pointer shows the direction in which you can move the handle.

3.Move the handles with drag&drop to the new positions.

Figure 4-7 Change sine curve position

or

1.Select the sine curve in the S diagram (distance diagram). The current position of the sine curve is shown in the tooltip.

2.Move the whole sine curve with drag&drop to the new position.

Figure 4-8 Changing the position of the complete sine curve

or

1. Double-click the sine curve. The Fx Sine Properties window appears.

CamTool	4-13
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0