Siemens 6AU1900-1AB32-0BA0 configurationmanual Functions

		Functions
		4.8 Optimizing a Cam
	Field/button	Explanation/instructions
Jerk (v > 0)
	Min	The minimum value is displayed here as absolute value and as
		percentage value depending on the physical limit.
		If the physical limit is undershot, the minimum value is displayed with a
		red background.
	Max	The maximum value is displayed here as absolute value and as
		percentage value depending on the physical limit.
		If the physical limit is exceeded, the maximum value is displayed with a
		red background.
Jerk (v < 0)
	Min	The minimum value is displayed here as absolute value and as
		percentage value depending on the physical limit.
		If the physical limit is undershot, the minimum value is displayed with a
		red background.
	Max	The maximum value is displayed here as absolute value and as
		percentage value depending on the physical limit.
		If the physical limit is exceeded, the maximum value is displayed with a
		red background.

Notice

For the slave axis, you can take over the settings of an axis already existing in the project via the menu Cam > Simulation settings and specify the limits of the axis. These simulation settings for the slave axis are used for the calculation of the percentage values which are displayed in the Limits tab.

CamTool	4-29
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0