Siemens 6AU1900-1AB32-0BA0 configurationmanual Change lines and fonts representation parameters

Configuring

3.5 Customize the display of the cam

Field/button	Explanation/instructions
Auxiliary line spacing	If the main line spacing option has been activated, you can
(Main line spacing activated)	also activate the display of the grid lines for the auxiliary line
	spacing.
	If you deactivate the Set automatically option, you can
	specify the grid line spacing for the auxiliary line spacing.
	Note:
	The spacing that you specify for the grid lines in the main
	line spacing must be a multiple of the spacing that you
	specify for the grid lines in the auxiliary line spacing.

3.5.5Change lines and fonts representation parameters

For the representation of the diagrams, default parameters are used for the lines and fonts. You can change these default settings.

/LQHIRUFDPVHJPHQWV

,QWHUSRODWLRQFXUYHLQWKHGLVWDQFHGLDJUDP

/LQHIRUVLPXODWHGLQWHUSRODWLRQ

<FRRUGLQDWHD[LV$X[LOLDU\JULGOLQHV

0DLQJULGOLQH

9HORFLW\FXUYH

;FRRUGLQDWHD[LV

$X[LOLDU\OLQH

$FFHOHUDWLRQFXUYH

$X[LOLDU\OLQH

-HUNFXUYH

/LQHDWSK\VLFDOOLPLW

Figure 3-16 Representation parameters in the diagrams (line for the scaling not shown)

3-22	CamTool
	Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0