HOW TO USE THE INSTRUMENT

4 - 73

This setup can be saved in memory as follows:

-Turn the TRACK control until memory location ’s7’ is selected.

-Press the softkey ’save’.

The actual setting of the front is now stored in memory location ’s7’. The indication in front of memory location number ’s7’ changes from an open circle to a closed circle.

CH1 500mV

MTB 500μs

ch1

FRONTS

s6

 

s7

T

s8

 

recall

undo

save

TEXT

CLEAR &

PROTECT

ST6735

9303

To recall a previously stored setting :

-Press the AUTOSET key.

The signal is displayed again with an amplitude of three divisions and with four periods.

-Press the SETUPS key.

-Use the TRACK control to select the same front number ’s7’ as in the previous example.

-Press the softkey next to ’recall’.

The stored settings are recalled and the trace is displayed in the same way as when the setup was stored.

A STANDARD FRONT setup can be recalled at any time by pressing the STATUS and TEXT OFF keys simultaneously.

Page 118
Image 118
Fluke PM3370B user manual This setup can be saved in memory as follows, To recall a previously stored setting