6 - 42THE CPL PROTOCOL

RECALL SETUP

RS

Purpose:

To recall an internally stored setup from one of 10 setup registers. This setup must have been stored in the oscilloscope manually or with the Save Setup (SS) command.

The command performs the same as the frontpanel key SETUPS together with the softkey RECALL.

Command:

"RS"

pds

setup reg

CR

<setup reg>

Response:

acknowledge

represents the setup register number ranging from 1...10

CR

Note:

<acknowledge> will be sent after the internal setup has been completed.

Example:

 

100

PRINT #1,"RS";5

:’Recall setting 5

110

GOSUB 1000

:’Sync on acknowledge

Page 259
Image 259
Fluke PM3370B user manual Recall Setup, 42THE CPL Protocol, Pds Setup reg