Fluke PM3370B user manual Action by Parameter Type Example Oscilloscope Notes

THE CPL PROTOCOL 6 - 23

wave_nr The oscilloscope waveform destination:

011 - 084 for m1.1 - m8.4 01e - 08e for m1.e - m8.e 091 - 504 for m9.1 - m50.4 (Extended Memory only)

09e - 50e for m9.e - m50.e (Extended Memory only)

(xx.e for 2 ch. models only; xx.3 and xx.4 for 4 ch. models only)

admin 16 parameters, separated by a "pds":

				ACTION BY
PARAMETER		TYPE	EXAMPLE	OSCILLOSCOPE NOTES
trace_name		string	m4.1	ignored
Y_unit		string	V	interpreted
X_unit		string	s	interpreted
Y_zero		number	+3	interpreted
X_zero		number	-8.625E-6	ignored
Y_resolution		number	78.13E-3	interpreted
X_resolution		number	1E-6	interpreted
Y_range		number	65535	ignored
date		string	25-01-1994	interpreted	3)
time		string	17:10:25:40	interpreted	4)
dT-corr		number	375E-3	interpreted	1)
min/max		number	0	interpreted	2)
mult_shot_tot		number	32	interpreted
mult_shot_nr		number	5	interpreted
reserved		string	0	ignored
reserved		string	0	ignored
Notes:	1)	dT = dT-corr * X-resolution		0 = waveform trace
	2)	1 = min/max trace envelopes
	3)	date format:	European = E25-01-1994
			American = A01-25-1994
			Japanees = J1994-01-25

for compatibility reasons (initial versions) European format without leading character can be used.

4) for compatibility reasons (initial versions) hundreds of seconds can be omited

count The number of samples in the waveform: 512, 1024, 2048, 4096, 8192, 16384 or 32768 (Extended Memory: 2048 and higher)