Fluke PM3370B user manual Real-time clock

FUNCTION REFERENCE 5 - 55

Real-time clock

The real-time clock is used to make time stamps on a hardcopy. Hardcopies will be stamped with two timestamps: the time of operation of the HARD COPY key and the time of trigger of the acquisition.

Adjust block	Three softkeys are used to adjust the clock. The
	softkey in the middle determines if the adjustment
	is done for day, month, year, hour, minutes or
	seconds. The item to be adjusted is displayed
	intensified. The adjustment is done with the upper
	and lower softkey. The upper softkey s gives an
	increase, the lower softkey t a decrease.
Date format	The date can be selected to be in the European
	format (day:month:year), USA format
	(month:day:year) or Japanese format
	(year:month:day).
Confirm	The adjusted time becomes active after pressing
	the softkey ENTER & RETURN.
Key sequence:

print

UTILITY PRINT& plot clk

PLOT&CLK

TRACK

LAYOUT

...

IEEE

RS232

ST7410

9312

Toggle softkey to select printer, plotter or clock menu.

Control to select printer (plotter) type.

Access to LAYOUT menu for printer or plotter.

Toggle softkey to select IEEE or RS-232 interface (only visible if IEEE interface is present).