Fluke PM3370B user manual Setups Track

FUNCTION REFERENCE 5 - 67

save: The actual set of settings is saved in the selected memory location.

recall: The settings saved in the selected memory location become the actual settings.

undo: The settings previous to the last recall action become active again.

CLEAR & PROTECT: in the CLEAR & PROTECT SETUPS submenu ’PROTECT on off’ can be used to protect a memory location by prohibiting save actions to this location.

clear all: in the CLEAR & PROTECT SETUPS submenu ’clear all’ leads to a confirm menu. The memory locations s1 to s10 are emptied altogether when ’yes’ is selected. Selecting ’no’ stops the clear action.

Note: Screen messages are given in the CRT viewing area when incorrect commands are given and the action is prohibited. Example: When one attempts to save settings to a protected memory location.

Key sequence:

SETUPS

TRACK

save

recall

undo

Settings memory selection.

Softkey to recall settings in selected memory location

Softkey to recall settings from before the last recall action

Softkey to save the actual front settings.

CLEAR& PROTECT

ST6766

9303

Softkey that leads to a dedicated menu to switch the memory protection of the settings and to clear memory contents.

Remote commands:

CPL: SS (To save a front in a desired memory) RS (To recall a front from a desired memory) PT (To program text into a setup register) QT (To query text from a setup register)

Refer to Chapter 6 for details