Fluke PM3370B Hex Dec Meaning Events Trigger Delay settings, Cursor settings, Display settings

THE CPL PROTOCOL			6 - 51
hex	dec	meaning
13	19	Events Trigger Delay settings
		(event counter low/high, trigger level low/high, trigger source, event
		bits, trigger coupling)
14	20	SCPI Trigger Settings (SCPI trigger source low/high)
20	32	Cursor settings
		(V cursors on/off, T cursors on/off, rise time on/off, control V/T, Vpp
		on/off, rise time 10-90/20-80, readout Vpp/V+V-, cursors on/off, V
		readout delta/absolute/ratio, T readout delta/1/delta/ratio, channel
		FFT read out dBm/dBμV/Vrms, FFT reference impedance)
21	33	Cursor autosearch settings
		(on/off, flank selection, reference selection, abs/rel)
31	49	Measurement 1 settings
32	50	Measurement 2 settings
		(Measure bits, measure type, source 1 low/high, source 2 low/high)
33	51	Pass/fail test settings
		(on/off, define, action, menu on/off, hardware on/off)

4165 Mathematics 1 settings

4266 Mathematics 2 settings

		(Mathematics bits, mathematics type, source 1 low/high, source 2
		low/high, scale low/high, scale minimum low/high, offset low/high,
		window width low/high)
50	80	Display settings
		(settings display on/off, ground level indicator on/off, trigger level
		indicator on/off, dots join on/off, x versus Y on/off, status view
		on/off, backup status view, window on/off))
51	81	Trace intensity settings
		(analog trace intensity low/high, mtb/dtb intensity ratio)
52	82	Display trace position setting (X position, Y position)
60	96	Setup label text (max 22 characters)
70	112	Real time clock setting (format)
F0	240	Special node for service purposes

It is NOT necessary to send all strings to the oscilloscope, when a setting must be changed.