Fluke PM3370B user manual Wavenr The oscilloscope waveform source, Parameter Type Example

6 - 36		THE CPL PROTOCOL
wave_nr The oscilloscope waveform source:
001	- 004 for CH1 - CH4	00e for EXT TRIG
011 - 084 for m1.1 - m8.4		01e-08e for m1.e - m8.e
091	- 504 for m9.1 - m50.4 (Extended Memory only)
09e	- 50e for m9.e - m50.e (Extended Memory only)

(xx.e for 2 ch. versions only; xx3 and xx4 for 4 ch. versions only)

admin 16 parameters, separated by a ",":

PARAMETER	TYPE	EXAMPLE	NOTES
trace_name	string	m4.1
Y_unit	string	V
X_unit	string	s
Y_zero	number	3	Y-position (reverse)
X_zero	number	-8.625E-6	Trigger delay
Y_resolution	number	78.13E-3
X_resolution	number	1E-6
Y_range	number	65535
date	string	[F]1994-01-25 1)
time	string	17:11:25:40 no",A" option: 17:11:25
dT-corr	number	375E-3	dT = dT-corr * X-resolution
min/max	number	0	1 = min/max trace
mult_shot_tot	number	32
mult_shot_nr	number	5
reserved	string	0
reserved	string	0

1)When ’A’ option is added; F = date format (E = European, A = American, J = Japanese) No option then E format.

count The acquisition length: 512, 8192, 16384 or 32768

(Extended Memory: 8192 and higher)

sample 2 bytes (Most Significant Byte + Least Significant Byte), representing the 16-bit sample value (bit 16 = -32768, bit 15 = 16384, ..., bit 1 = 1). Range: -32k (down) ... +32k (up)

Example: 1000000011000111 = value -32569 byte 1 byte 2

byte 1 = 128 (value -32768)

byte 2 = 128+64+4+2+1 = 199 (value +199)

checksum 1 byte checksum over all sample bytes