3 - 16 GETTING STARTED
3.11 MORE ADVANCED FEATURES
All basic functions are accessed by dedicated keys for fast and easy operation.
Some of the more advanced features are menu operated. Menus are called up by
pressing one of the keys identified with blue text on the front panel. After you
press one of these keys, a menu is displayed on the right side of the screen. This
menu gives you access to the more advanced functions of the oscilloscope. Use
the blue softkeys to the right of the screen to select the desired functions; the
selected function is indicated by the highlighted text.
Step 1 Press the key marked TRIGGER.
Check that the ’TRIGGER MAINTB’ menu is displayed at the right side
of the screen.
After changing the setting, you can deactivate the menu again to use
the full screen for the signal.
There are two ways to do this:
- Press the TRIGGER key once again.
- Press the TEXT OFF key.
The TEXT OFF key operates in a 1-2-3 cycle, and allows you to blank
the bottom text line as well.
Step 2 Use both methods to familiarize yourself with turning the menus and
the bottom text line on and off.
TRIGGER
TRIGGERWITH
MENUKEY
1234
ST6433
9303
SOFTKEYS

Figure 3.8 Menu keys and softkeys

CH1200mV MTB 200µsCH1
CH1200mV MTB 200µsCH1
TEXTOFF TEXTOFF
TEXTOFF
ST6679
TRIGGER
MAINTB
edgetv
logic
ch1
line