Fluke PM3370B Measurement Functions, Start with the standard setting.This ensures a correct start

HOW TO USE THE INSTRUMENT 4 - 49

4.11 MEASUREMENT FUNCTIONS

When operating in the analog mode, you can use the cursors to measure amplitude and time data.

When operating in the digital mode, the scope has an extensive set of fully automated amplitude and time measurement functions. You can select two measurements to be performed simultaneously. These measurements are updated automatically, so that when signals change, the measured values automatically changed at the same time. The read- outs are displayed in the upper section of the screen.

STANDARD SETTING

Start with the standard setting.This ensures a correct start.

-Simultaneously press the STATUS and TEXT OFF keys.

-Connect the Probe Adjust signal to channel 1.

The Probe Adjust signal now supplied to the input is a square wave with a lower level of 0V and a top level of 600 mV.

-Press AUTOSET.