EMC 69001166 manual Ports initiators Navicli -np -d device, Where Device is the name

				Linux Installation Checklist
Task		With Access Logix	Without Access Logix	Reference Document
6	FC4500 Storage	For existing HBAs		Navisphere CLI
	System	An existing HBA is one that is		reference
	Set properties for
		registered with the storage system.
	PowerPath	❑ From the computer connected to
	(cont.)
		the storage system’s serial port,
		use the following Navisphere CLI
		commands to set the following
		storage-system properties for the
		server’s existing HBA existing
		ports (initiators):
		navicli -np -d device
		storagegroup -sethost -host
		servername -type 3
		navicli -np -d device
		storagegroup -sethost -host
		servername -failovermode 1
		navicli -np -d device
		storagegroup -sethost -host
		servername -arraycommpath 1
		where
		device is the name of the
		computer port connected to the
		storage-system serial port (for
		example, com1).
		servername is the name of the
		server with the HBAs
7	Server	❑ Reinstall (reload) the Navisphere	❑ Reinstall (reload) the Navisphere	CX-Series Server
	Re-install Host	Host Agent or Navisphere Server	Host Agent or Navisphere Server	Software for Linux
		Utility.	Utility.	Installation Guide
	Agent or Server
	Utility	❑ Start Navisphere Host Agent or	❑ Start Navisphere Host Agent or
		run the Navisphere Server Utility.	Navisphere Server Utility.

PowerPath Checklist — Existing Linux Server and Existing Storage System

3-33