EMC 69001166 Checkpoint Make sure, For LUNZs, Have not be configured yet, For the HBA directory

Linux Installation Checklist

Task	With Access Logix		Without Access Logix		Reference Document
11 Server	❑	Add persistent bindings to the	❑ Add persistent bindings to the		HBA documentation
Make target SPs		HBA driver configuration file.		HBA driver configuration file.	(see URL on page 3-4)
available		Note: You need the WWPN of		Note: You need the WWPN of
		each SP port for the bindings.		each SP port for the bindings.
	❑	Reboot the server.	❑	Reboot the server.	Linux documentation
	❑	Checkpoint - Use Navisphere			Navisphere Manager
		Manager’s Connectivity Status			administrator’s guide
		dialog box to verify that each HBA			and online help
		is registered with the storage
		system.
	❑	Checkpoint - Make sure the	❑	Checkpoint - Make sure the	Linux documentation
		/proc/scsi/scsi file has entries		/proc/scsi/scsi file has entries
		for LUNZs.		for LUNZs.
		Note: LUNZs are required to		Note: LUNZs are required to
		register the server HBAs with the		register the server HBAs with the
		storage system because LUNs		storage system because LUNs
		have not be configured yet.		have not be configured yet.
	❑ Checkpoint - Make sure the file		❑ Checkpoint - Make sure the file
		for the HBA directory in the		for the HBA directory in the
		/proc/scsi directory has entries		/proc/scsi directory has entries
		for the expected targets (HBAs).		for the expected targets (HBAs).

3-18

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems