EMC 69001166 manual Unmount file, Systems Server, Agent, Admsnap Higher

HP-UX Installation Checklist

PowerPath Checklist - Existing HP-UX Server and Existing Storage System

Complete the tasks highlighted with grey in the checklist before the service provider arrives.

The Without Access Logix column does not apply to CX300, CX500, and

CX700 storage systems because they ship from the factory with the Access

Logix enabler installed.

Task		With Access Logix		Without Access Logix	Reference Document
1	Server	❑ Unmount any file systems that		❑ Unmount any file systems that	HP-UX documentation
	Unmount file	reside on the storage system.		reside on the storage system.
	systems
2	Server	❑ If you need additional HBAs to		❑ If you need additional HBAs to	HBA documentation
	Install additional	provide more paths to the storage		provide more paths to the storage
		system, install these HBAs.		system, install these HBAs.
	HBAs
		CAUTION Do not connect cables		CAUTION Do not connect cables
		to the HBAs until you are told to		to the HBAs until you are told to
		do so later in this procedure.		do so later in this procedure.
3	Server	❑ If the following software is		❑ If the following software is	HBA documentation
	Update Software	currently installed and not at the		currently installed and not at the	Navisphere Host Agent
		required minimum revision		required minimum revision
					and CLI for HP-UX
		(page 2-3), update it:		(page 2-3), update it:
					installation guide
		•	HBA driver	• HBA driver (Navisphere Host
					SnapView installation
				Agent
		•	Navisphere Host Agent		guide (revision A02 or
		•	admsnap		higher)
4	Storage System	❑ If currently installed		❑ If currently installed	Navisphere Manager
	Update software	storage-system software is not at		storage-system software is not at	administrator’s guide
		the required minimum revision		the required minimum revision	and online help
		(see page 2-3), update it.		(see page 2-3), update it.
		CAUTION During the software		CAUTION During the software
		update, hosts connected to the		update, hosts connected to the
		storage system will lose access to		storage system will lose access to
		data if they do not have failover		data if they do not have failover
		software or if all paths to an SP		software or if all paths to an SP
		are down.		are down.

PowerPath Checklist - Existing HP-UX Server and Existing Storage System

2-33