EMC 69001166 manual FC4500 Storage For new HBAs Navisphere CLI System, Other cases

			Solaris Installation Checklists
Task	With Access Logix	Without Access Logix		Reference Document
7 FC4500 Storage	For new HBAs (cont.)	For new HBAs (cont.)		Navisphere CLI
System	❑ From the computer connected to	❑ From the computer connected to		reference
Set properties for
	the storage system’s serial port,	the storage system’s serial port,
PowerPath (cont.)	use the following Navisphere CLI	use the following Navisphere CLI
	commands to set the following	commands to set the following
	default storage-system	default storage-system
	properties:	properties:
	navicli -np -d device	navicli -np -d device
	failovermode 1	failovermode 1
	navicli -np -d device	navicli -np -d device
	arraycommpath 1	arraycommpath 1
	navicli -np -d device	navicli -np -d device
	unitserialnumber lun (only for	unitserialnumber lun (only for
	server in a Sun Cluster; it must	server in a Sun Cluster; it must
	left at the default setting for all	left at the default setting for all
	other cases)	other cases)
	where device is the name of the	where device is the name of the
	computer port connected to the	computer port connected to the
	storage-system serial port (for	storage-system serial port (for
	example, com1).	example, com1).

PowerPath Checklist — Existing Solaris Server and Existing Storage System

5-37